Page 1 of 2
Expanding my Loop (Finally)
Posted: Sat Dec 12, 2015 1:02 am
by Nilk
Howdy,
When I initially built my current system, I did so with the thought of expanding the water cooling using hard line tubing.
I've got the parts on the way and I'm updating the information here!
https://nilkilla.wordpress.com/2015/12/ ... expansion/
Posted: Sat Dec 19, 2015 12:52 am
by Nilk
Posted: Sun Dec 20, 2015 12:05 pm
by Nilk
Posted: Sun Dec 20, 2015 10:50 pm
by Nilk
First portion of line installed!
Adventures in Line Building
Posted: Tue Dec 22, 2015 9:57 am
by XMEN Gambit
I may get around to doing water cooling someday. Or not.
What's the line made of, just stiff plastic?
Posted: Tue Dec 22, 2015 1:49 pm
by Nilk
Acrylic, so pretty much yeah
Posted: Tue Dec 22, 2015 2:24 pm
by XMEN Gambit
Acrylic? I thought that needed something hotter than a heat gun to shape, but guess not.
Posted: Sat Dec 26, 2015 2:47 am
by Nilk
Finally done with the hardline installation. I still have quite a bit more to do before I'm up and running, but figured it was time for an update!
https://nilkilla.wordpress.com/
Posted: Wed Dec 30, 2015 8:59 pm
by Nilk
Posted: Thu Dec 31, 2015 11:55 am
by Starmage21
Pretty.
I'm working on an FX-8350 build for 2016 that will scream. I'm expecting that by the time I upgrade again, the Zen architecture shouldve gotten cheaper.
Posted: Thu Dec 31, 2015 9:25 pm
by Nilk
I ran a 8.5 hour Intel XTU stress test last night and between the 6 cores, the highest temp was 54 degrees. GPUs are running around 30, but will be stress testing them soon. Should be getting the UV dye next week.
Though, fun question...any idea how to pH test orange fluid?
Posted: Sun Jan 03, 2016 10:38 am
by XMEN Gambit
Posted: Mon Jan 04, 2016 11:01 am
by Nilk
Grabbed the one with the calibration solution, otherwise perfect. Thanks!
Posted: Wed Jan 06, 2016 10:46 pm
by Nilk
Updated. Thanks for the pH meter suggestion Gambino!
https://nilkilla.wordpress.com/
Posted: Fri Jan 08, 2016 3:18 pm
by XMEN Gambit
Glad that worked for you! You like the keyboard?